Tel: 
Email: 
WhatsApp: Description
Key Technical Specifications
- Motor Series: BL Super P Series
- Rated Output: 100 W
- Rated Voltage: 200 V AC
- Motor Type: AC Servo Motor
- Encoder: Optical shaft encoder (Verify specific PPR with OEM datasheet)
- Shaft Type: Keyed shaft with Oil Seal (Standard for ‘D’ series)
- Brake: Without holding brake (Verify ‘B’ designation in full manual)
- Flange Size: 60 mm frame
- Insulation Class: Class B or F (Standard industrial rating)
- Protection Rating: IP65 (Typical for this series, verify nameplate)
Product Introduction
The Sanyo Denki P30B06010DXS8SM is a 100W AC servo motor from the renowned BL Super P Series. It is widely used in precision automation equipment, robotics, and CNC machinery where accurate speed and position control are critical.This motor is known for its fast dynamic response and compact 60mm frame design. In field applications, pairing this motor with a matched Sanyo Denki driver significantly reduces tuning time and ensures stable operation under variable loads.
Installation & Configuration Guide
Phase 1: Preparation (10 min)
- Check the motor nameplate to confirm the voltage (200V AC) and power (100W) match your driver and power supply.
- Ensure you have the correct mating connectors for power and encoder cables.
- Verify your driver is compatible with the BL Super P Series protocol.
Phase 2: Handling & Inspection (5 min)
- Wear an ESD wrist strap when handling the motor connector.
- Critical Step: Before connecting any cables, take a clear photo of the motor nameplate and the encoder connector pins to ensure no physical damage occurred during transit.
Phase 3: Mechanical Installation (10 min)
- Mount the motor securely to the machine frame using the 60mm flange.
- Connect the motor shaft to the load (gearbox or ball screw). Ensure perfect alignment to prevent bearing wear.
- Tighten the coupling set screws securely. (Vibration can loosen these, leading to positional errors).
Phase 4: Electrical Connection & Test (10 min)
- Connect the power (U, V, W) and encoder cables to the corresponding driver terminals. Never swap power and encoder cables—this will instantly destroy the encoder.
- Double-check that the driver parameters match the motor’s 100W rating.
- Power on the system and perform a no-load jog test to verify rotation direction and encoder feedback.
Troubleshooting Quick Reference
| Symptom | Probable Cause | Quick Fix |
|---|---|---|
| Motor does not rotate | Incorrect driver parameters | Verify motor code and 100W setting in driver. |
| Motor vibrates or hums | Phase sequence error | Check U, V, W power cable connections. |
| Encoder alarm / error | Encoder cable damage | Inspect cable for breaks; check connector pins. |
| Overheating during operation | Mechanical overload | Check for binding in the load or coupling misalignment. |
| Positional drift | Loose coupling | Retighten mechanical coupling set screws. |
Dimensions, Mounting & Wiring Notes
- Mounting: 60 mm square flange.
- Shaft: Keyed shaft (Standard).
- Wiring: Use shielded cables for encoder feedback to prevent electrical noise interference.
- Grounding: Connect the motor flange and driver ground terminals to a common earth ground.
FAQ
Q: I have a Sanyo driver, but I’m getting an encoder error. What gives?
A: The most common issue is a damaged encoder cable or a bent pin in the connector. Also, ensure your driver is configured for the correct encoder resolution (PPR) for the P30B06010 model.Q: Can I use this motor with a different brand of servo driver?
A: It is highly recommended to use a genuine Sanyo Denki driver. Third-party drivers often lack the specific communication protocol required for the BL Super encoder, leading to instability.Q: Does this motor come with a holding brake?
A: The standard P30B06010DXS8SM typically does not include a holding brake. If your application requires the motor to hold position when powered off, verify the exact sub-model suffix on the nameplate or check the OEM datasheet.Q: How do I know the motor is genuine and not a refurb?
A: We perform strict incoming inspections, including verifying the serial number and physical anti-counterfeit markers. We also run a 24-hour load test on a dedicated test rack to ensure the motor runs smoothly without abnormal noise or heat.Q: What happens if I wire the U, V, W phases incorrectly?
A: The motor will likely vibrate, hum loudly, or rotate in the wrong direction. Modern drivers usually detect this and throw an alarm, but prolonged incorrect wiring can overheat and damage the motor windings.Q: Is this motor suitable for outdoor use?
A: While it has a standard IP65 rating (dust and water jet resistant), it is designed for industrial indoor environments. Avoid direct exposure to corrosive chemicals or constant submersion.
