Key Technical Specifications

• Product Model: H90 H90C9AA0117S
• Manufacturer: FOXBORO
• Product Category: Server / Storage Component
• Communication Interfaces: RS232, RS485, Ethernet
• Control Precision: High-accuracy process parameter regulation
• Operating Temperature: Wide-range industrial tolerance
• Target Industries: Power, Oil & Gas, Chemical, Natural Gas
• Data Exchange: High-speed communication with upper-level systems

Product Introduction

FOXBORO H90 H90C9AA0117S serves as a critical server and storage component within industrial automation networks. It manages high-precision process control data and facilitates reliable communication between field devices and central control systems.This unit integrates solid-state storage with multiple communication protocols to ensure continuous operation in demanding environments. Its design supports high-speed data exchange across RS232, RS485, and Ethernet interfaces, maintaining system integrity for critical infrastructure applications.

Installation & Configuration Guide

• Preparation (10 min): Verify power is isolated. Confirm the H90C9AA0117S matches the required hardware revision. Gather ESD protection gear.
• Removal (5–10 min): Disconnect Ethernet and serial cables. Release mounting hardware. Slide the unit out carefully to avoid backplane pin damage.
• Installation (10 min): Align the H90 H90C9AA0117S with backplane guides. Apply even pressure until fully seated. Reconnect cables and secure mounting hardware.
• Power-On & Test (10 min): Restore power. Monitor LED indicators for normal boot sequence. Verify communication handshake via Ethernet or serial port.

 

Troubleshooting Quick Reference

• No Power / Blank LEDs: Check 24 VDC supply at the terminal block. Measure voltage; it must be within ±10%.
• Communication Failure: Verify Ethernet cable continuity. Confirm IP configuration matches the subnet.
• Intermittent Data Loss: Inspect RS485 termination resistors. Check for ground loops or EMI sources near the cable routing.
• System Fails to Boot: The internal SSD may be corrupted. Attempt a known-good replacement drive if available.

Dimensions, Mounting & Wiring Notes

• Mounting Method: Standard industrial rack or backplane slot insertion.
• Terminal Notes: Use shielded twisted-pair cabling for RS485. Ground shields at one end only to prevent ground loops.
• Dimensions: Standard industrial form factor; refer to OEM mechanical drawing for exact H×W×D.

 

FAQ

• Is this H90C9AA0117S compatible with my older I/A Series system? Compatibility depends on the exact hardware revision. Send a photo of the existing module’s label for verification.
• What condition is this part in? It is a refurbished, fully tested unit. Function was verified under test conditions on a dedicated FOXBORO rack.
• I noticed a slight scuff on the casing, is it safe? Minor cosmetic wear is normal for industrial spares. We guarantee internal functionality and electrical safety.
• How long does shipping usually take? Most verified orders ship within 24 hours. Expedited options are available at checkout.
• Can I use this as a direct drop-in replacement? Yes, provided the base model matches. Always document DIP switch or jumper settings before swapping.
• Do you offer a warranty on this server component? Yes, all tested units include a 12-month functional warranty.