Key Technical Specifications

• Product Model: EABT3 B9302 997009302
• Manufacturer: HIMA
• Product Type: I/O Sub-Rack Kit
• Rack Dimensions: 4-Unit High, 19-Inch Form Factor
• I/O Slot Capacity: 16 Slots (Slots 1–16)
• Power Distribution Slots: 4 Slots (Slots 18–21)
• Included Communication Module: F7553
• Data Cable Length: 0.5 m to 30 m (Variant dependent)
• Power Module Compatibility: F7133 (4-Channel)
• Operating Environment: Industrial Safety-Critical Applications
• Condition: New Surplus / Tested
• Warranty: Standard Supplier Warranty

 

Product Introduction

HIMA EABT3 B9302 997009302 serves as a dedicated I/O sub-rack kit within the H51q-HRS safety system architecture. It expands the input/output capacity for critical safety controllers in high-integrity process plants.This kit includes a 19-inch FK1406 chassis, an F7553 communication link module, and a BV7032 data cable. Field installations often require careful routing of the bus cable, as the maximum allowable length is strictly limited to 30 meters. (Always verify the exact cable length suffix on the purchase order to avoid integration delays).

Installation & Configuration Guide

Preparation (10 min): Gather the EABT3 B9302 997009302 kit components and verify all parts against the packing list. Ensure the central rack and sub-rack are powered down. Route the BV7032 data cable away from high-voltage lines.Removal (5–10 min): Disconnect the existing data cable from the F7553 module. Unmount the old sub-rack if replacing. Inspect the backplane connectors for bent pins or debris.Installation (10 min): Mount the 19-inch FK1406 chassis securely. Insert the F7553 communication module into its designated slot. Connect the BV7032 data cable to both the central rack and the sub-rack. Install F7133 power distribution modules in slots 18–21.Power-On & Test (10 min): Restore power to the central rack, then the sub-rack. Verify the F7133 fuse status indicators. Check the safety controller diagnostics to confirm the sub-rack is recognized and communicating.

 

Troubleshooting Quick Reference

• Sub-Rack Not Recognized: Inspect the BV7032 data cable connections. Reseat the F7553 communication module.
• Power Distribution Fault: Check the F7133 module status. If a slot is empty, verify the fault contact jumper is bypassed correctly.
• Intermittent Communication: Measure the data cable length. Ensure it does not exceed the 30-meter maximum limit.
• Fuse Status Error: Verify that all installed F7133 modules have functional fuses. Check the neutral contact fault signal wiring.

Dimensions, Mounting & Wiring Notes

• Dimensions: 4-Unit High, 19-Inch Standard Rack
• Weight: Kit dependent (Includes chassis, modules, and cabling)
• Mounting Method: 19-Inch Cabinet Rack Mounting
• Wiring Notes: Use the specified BV7032 data cable. Route power and signal cables separately to maintain safety integrity levels.

 

FAQ

What exactly is included in the EABT3 B9302 997009302 kit?
The kit includes one 19-inch FK1406 I/O sub-rack, one F7553 communication link module, one BV7032 data cable, and up to four F7133 power distribution modules.I need this shipped immediately. Do you have stock?
Yes. We carry New Surplus inventory of HIMA safety components. Orders placed before 2 PM EST ship same-day.Can I use a standard Ethernet cable instead of the BV7032?
No. The BV7032 is specifically designed for the H51q-HRS safety bus. Using unapproved cabling can compromise system safety and communication integrity.How do I configure the power distribution modules?
Install the F7133 modules in slots 18 through 21. If a slot is unused, you must bypass its fault contact using a jumper wire to prevent a system alarm.What if the communication link fails after installation?
First, verify the data cable length is under 30 meters. Next, check the F7553 module seating. Finally, review the central controller’s diagnostic logs for specific bus errors.I lost the original data cable. Can you supply a replacement?
Yes. We stock BV7032 cables in various lengths. Specify your required length (up to 30 m) when ordering so we can match the correct variant for your EABT3 B9302 997009302 kit.