Triconex FTA-544 | Digital Output Termination Board
Triconex FTA-544 | Digital Output Termination Board - Image 2
Triconex FTA-544 | Digital Output Termination Board - Image 3
Triconex FTA-544 | Digital Output Termination Board - Image 4

Triconex FTA-544 | Digital Output Termination Board

  • Model: FTA-544 (P/N 17-550544-001B)
  • Brand: Triconex (Schneider Electric)
  • Series: Tricon TMR Safety Systems
  • Core Function: Field Termination Assembly (FTA) for digital output modules
  • Type: Termination Board / Interface Base
  • Key Specs: 24 Vdc / 120 Vac, 50-60 Hz, 8-Point Output Interface
Category: SKU: FTA-544 TRICONEX

Description

Key Technical Specifications

Parameter Specification
Part Number 17-550544-001B
Product Type Field Termination Assembly (FTA)
System Compatibility Triconex TMR (Triple Modular Redundant)
Associated Module Digital Output Modules (e.g., 3664, 8110)
Voltage Rating 24 Vdc / 120 Vac
Frequency 50-60 Hz
Channel Density Supports up to 8 digital outputs
Connection Type Removable terminal blocks
Mounting DIN Rail or Panel Mount
Function Signal conversion and field wiring interface

Product Introduction

The Triconex FTA-544 (Part Number 17-550544-001B) is a Field Termination Assembly designed for use with Triconex TMR safety control systems. It serves as the physical interface between the system’s digital output modules and the external field devices, such as relays, solenoids, or indicator lights. By converting the module’s internal bus signals into isolated field wiring connections, the FTA-544 ensures reliable command execution in critical industrial applications.This unit is engineered for high availability and ease of maintenance. It features a modular design that allows for the removal of terminal blocks without disturbing the field wiring, significantly reducing downtime during inspections or replacements. Compatible with standard Triconex digital output modules, it supports voltage inputs of 24 Vdc or 120 Vac, making it versatile for various plant power standards. Its rugged construction ensures stability in harsh environments typical of oil and gas, chemical, and power generation facilities.

 

Installation & Configuration Guide

Preparation (10 min)

  1. Safety: Ensure the Triconex system power and field power supplies are OFF and locked out.
  2. Verify the part number matches the system design (17-550544-001B).
  3. Prepare the field wiring (typically 16-18 AWG) and ensure cable glands are ready.

Removal (5–10 min)

  1. If replacing an existing unit, disconnect the field wiring from the terminal blocks.
  2. Unlatch the terminal blocks from the FTA base.
  3. Unscrew the FTA mounting clips from the DIN rail or panel.

Installation (10 min)

  1. Mount the FTA-544 base onto the DIN rail or secure it to the panel.
  2. Re-attach the terminal blocks (if removed) and ensure they click into place.
  3. Connect the field wiring to the appropriate terminals according to the system wiring diagram.
  4. Connect the ribbon cable from the Triconex output module (e.g., 3664) to the FTA connector.

Power-On & Test (10 min)

  1. Restore power to the system.
  2. Check the system diagnostics via the Triconex TriStation software.
  3. Force a digital output “ON” to verify the signal reaches the field device.
  4. Verify there are no “Open Circuit” or “Short Circuit” faults on the module.

 

Troubleshooting Quick Reference

Symptom Probable Cause Corrective Action
Output Not Activating Loose wiring or blown fuse. Check terminal tightness; inspect field fuses if applicable.
Module Fault LED Ribbon cable disconnected. Reseat the ribbon cable connecting the module to the FTA.
Intermittent Signal Corroded terminals. Inspect terminal blocks for oxidation; clean or replace.
Short Circuit Alarm Field wiring short. Measure resistance at terminals; isolate field wiring to find short.

 

Dimensions, Mounting & Wiring Notes

  • Dimensions: Standard FTA footprint (approx. 120mm x 100mm x 60mm).
  • Mounting: Designed for standard 35mm DIN rail or direct panel mounting.
  • Wiring: Uses removable screw terminal blocks for easy maintenance.
  • Note: Ensure the field voltage (24VDC vs 120VAC) matches the configuration of the associated output module.
FTA-544 TRICONEX

FTA-544 TRICONEX

FAQ

What is the FTA-544 used for?
It is a Field Termination Assembly that connects Triconex digital output modules to field devices like solenoids and relays, providing a safe and organized wiring interface.Which output modules are compatible with the FTA-544?
It is typically used with Triconex digital output modules such as the 3664 or 8110. Check your system manual for the specific module pairing.Can I use this for analog signals?
No, the FTA-544 is designed specifically for digital (discrete) output signals. Analog signals require a different FTA model (e.g., FTA-A series).What does the part number 17-550544-001B mean?
This is the specific manufacturer part number for the FTA-544 assembly, indicating the revision and configuration of the board.Is the terminal block removable?
Yes, the FTA-544 features removable terminal blocks, allowing you to disconnect wiring harnesses without unscrewing individual wires.

Related products