Tel: 
Email: 
WhatsApp: Description
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Honeywell |
| Model Number | FTA-T-14 |
| Product Type | Analog Input Module |
| Input Channels | 8 Channels (Expandable) |
| Signal Types | 4-20mA, 0-10V |
| Accuracy | 0.1% Full Scale |
| Sampling Rate | 1kHz |
| Communication | Modbus RTU/TCP, Profibus DP |
| Operating Temp | -40°C to +85°C |
| Mounting | DIN Rail / Control Cabinet |
| Power Supply | 24VDC (Typical) |
Product Introduction
The Honeywell FTA-T-14 is a high-performance analog input module designed for industrial automation and process control applications. As a key component in data acquisition systems, it collects continuous analog signals from sensors and transducers—such as temperature, pressure, flow, and level—and converts them into digital data for processing by a PLC or DCS.Featuring 8 input channels, this module supports both 4-20mA current loops and 0-10V voltage signals, providing flexibility for diverse sensor types. With a sampling rate of 1kHz and an accuracy of 0.1% full scale, it ensures precise and responsive control in demanding environments. The module supports multiple industrial communication protocols, including Modbus and Profibus, facilitating seamless integration into existing control networks.
Installation & Configuration Guide
Preparation
- Verify the model number FTA-T-14 matches the system requirement.
- Ensure the power supply is rated for at least 24VDC with a sufficient current capacity (refer to the module’s power consumption).
- Safety: Disconnect power to the control panel before touching any modules.
Removal
- Locate the faulty or replacement module in the DIN rail or chassis.
- Release the locking mechanism or unscrew the mounting hardware.
- Carefully disconnect the terminal blocks; note the wire positions or take a photo for reference.
Installation
- Align the FTA-T-14 with the DIN rail or chassis slot.
- Secure the module firmly to prevent vibration-related failures.
- Reconnect the wiring to the corresponding terminals, ensuring all connections are tight and secure.
Power-On & Test
- Restore power to the system.
- Check the front panel LED indicators for a steady “OK” status.
- Use a HMI or configuration software to verify the module is recognized and communicating.
- Apply a test signal (e.g., 12mA or 5V) to each channel to verify the input readings are within the expected range.
Troubleshooting Quick Reference
| Symptom | Probable Cause | Action |
|---|---|---|
| Communication Error | Incorrect IP address or cable fault | Verify network settings and cable connections. |
| Input Out of Range | Wiring error or sensor failure | Check field wiring and sensor output. |
| Module Not Powering | Power supply failure | Measure 24VDC at the terminal block. |
| Intermittent Readings | Loose terminal or EMI interference | Tighten terminal screws; check for nearby noise sources. |
Dimensions, Mounting & Wiring Notes
- Mounting: Designed for DIN rail mounting (EN 50022) or standard control cabinet installation.
- Wiring: The module features screw-type terminal blocks. Proper wire stripping and tightening are critical to prevent connection loss.
- Dimensions: 100W x 108H x 45D mm (approximate).
FTA-T-14 HONEYWELL
FAQ
What is the FTA-T-14 used for?
It is used to convert analog signals (4-20mA or 0-10V) from field sensors into digital data for a PLC or DCS, enabling precise process monitoring and control.
What types of sensors can it connect to?
It supports standard industrial sensors, including pressure transmitters, temperature probes, flow meters, and level sensors that output 4-20mA or 0-10V signals.
How many channels does it have?
The standard unit has 8 input channels, and some configurations allow for expansion to support more channels.
What communication protocols does it support?
It supports Modbus RTU/TCP and Profibus DP, making it compatible with a wide range of industrial control systems.
Can I test this module before installing it?
Yes, during the power-on test, you should verify communication with the master controller and check that the input channels read within an acceptable range when a test signal is applied.
Honeywell FTA-T-14 Analog Input Module
