CCD ISM 1403-C11 | Machine Vision Camera 1403-C11 Factory Sealed

Description

Key Technical Specifications

Product Introduction

In the world of machine vision, you don’t always need a 20-megapixel monster to get the job done. The CCD ISM 1403-C11 is a classic workhorse color camera designed for reliable object detection and basic color sorting. Unlike modern CMOS sensors that can suffer from rolling shutter distortion on fast-moving lines, this CCD sensor provides a true global shutter, capturing the entire frame at once without skew.What makes the 1403-C11 a favorite for legacy system maintenance is its straightforward analog or basic digital output. It plugs right into older frame grabbers or simple monitor setups without needing complex GigE or USB3 Vision drivers. The metal housing is tough enough to handle the vibrations of a factory floor, and the standard C-mount means you can swap lenses easily if your field of view needs to change. Just keep in mind, CCDs run warmer than CMOS, so don’t block its ventilation if it has any.

Quality SOP & Tech Pitfalls (The Reality Check)

The Lab Report (SOP)
Before shipping, every ISM 1403-C11 goes through a strict visual and functional check. We inspect the C-mount threads for damage and ensure the CCD glass is free of dust, oil, or dead pixels. It is then mounted on a test bench and powered up with the correct DC voltage to verify a clean, stable video feed with accurate color reproduction. We also check the multi-pin connector for bent pins and seal the unit in anti-static packaging.The Engineer’s Warning (Pitfalls)
Here is the number one way to kill these cameras: bad power. Industrial 24V lines are notoriously noisy. If you hook this up directly to a dirty power rail without proper regulation or filtering, you will introduce rolling bars of interference into your video feed, or worse, fry the internal board. Always use a clean, regulated power supply. Also, be extremely careful with the C-mount lens—overtightening it can crack the sensor’s protective glass, which is an instant write-off.

Installation & Configuration Guide

1. Pre-Installation: ⚠️ Power down the vision system completely. Ensure you have a clean 12V or 24V DC power source ready (double-check the sticker on the camera body).
2. Mounting: Secure the camera to the bracket using the standard 1/4-20 tripod mount or the side holes. Make sure it is rigid; any vibration will blur your image.
3. Lens Installation: Remove the body cap and screw on your C-Mount lens. Do not overtighten. Adjust the aperture and focus ring to your desired field of view.
4. Wiring & Power-On: Connect the video output and power cables to your frame grabber or monitor. Power on the system and check for a clear image. If the colors look washed out, check your white balance settings or lighting conditions.

Compatible Replacement Models

• ✅ Drop-in Replacement: ISM 1403-C11. This is the exact model. If your old camera is failing, this direct swap requires no bracket or software changes.
• ⚠️ Software Compatible: ISM 1403-M11. This is the monochrome (black and white) version of the same camera. The physical dimensions and wiring are identical, but you will lose color data, which might break color-sorting logic in your PLC or vision software.
• ❌ Hardware Mod Required: Modern USB3/GigE Vision Cameras. Upgrading to a modern digital camera will require new cabling, a new power setup, and a complete rewrite of your machine vision application.

Frequently Asked Questions (FAQ)

Does this camera have audio?
No, the ISM 1403-C11 is strictly an industrial imaging sensor. It transmits video data only.Can I use any lens with this camera?
Yes, as long as it is a standard C-Mount lens. Just make sure the lens image circle is large enough to cover the CCD sensor size, otherwise you will see black corners (vignetting) in your image.Why is my image flickering or has rolling bars?
This is almost always a power supply issue or lighting frequency mismatch. Ensure your power supply is clean and regulated. If you are using fluorescent lights, try adjusting the shutter speed to match the light frequency (50Hz/60Hz).Is this camera waterproof?
No. The ISM 1403-C11 is designed for indoor industrial environments. If you need to use it in a washdown area, you must install it inside a proper IP67-rated protective housing.What is the difference between CCD and CMOS?
CCD sensors (like in this model) generally offer better light sensitivity and a global shutter, making them excellent for capturing fast-moving objects without distortion. CMOS is newer and cheaper but can suffer from “rolling shutter” effects.